Latest Product Changes & Options
| Latest poduct changes developed | |||
| Change description | Application of the change | Market affected | Equipment in production affected |
| OLYMPUS, OLYMPUS MINI, AND OLYMPUS TP | |||
| A new adhesive has been created for the button panel of the V4 car terminal. This new reference includes a yellow stripe for signaling the emergency stop area. This change has been created to comply with ISO 13850:2015. This change affects the OL Mini CE, Olympus and Twinpack in all their models. | 11/04/2022 | CE markets | |
| O L Y M P U S T P | |||
| The electrical cabinet in the OLTPs has been updated. Currently the opening of the door is manual and the operator must leave the door separate from the electrical panel in order to carry out repairs or maintenance plans. With the new version, the door will be hinged for easy opening (the assembly will be similar to the electric cabinet in the OL).The front plates of the body have also been updated in which 6 holes have been added, two for fixing the compressed air filter and four for holding the front oil pan for CNG equipment, thus it will not be necessary to carry out the holes on the assembly line. | 30/04/2022 | CE Markets | RRSA: 318348-55 / 318552-3 / 317989-90 / 317996 |
| O L Y M P U S M I N I | |||
| AMENDMENT TO THE EMAIL SENT DECEMBER 2022. It said "Material for OL MINI body platforms have been updated from HARDOX 400 to HARDOX HiACE. This modification has been done to avoid some rusty points detected in some units of OL". This modification is not included as standard, only with new option 2019020. See below the list of UPDATED OPTIONS. |
CE markets | ||
| O L Y M P U S M I N I and S L M | |||
| Support to hold the fire extinguisher box on an OL MINI has been updated. 2 new holes have been added and position of 2 existing holes have been modified. The reason for the change is to take advantage of the same support and to be able to mount it also in the SLM, in this way the same option can be mounted in two different equipment. | 22/04/2022 | CE markets | |
| O L Y M P U S | |||
|
A new roof+light bridge has been created for the assembly of the OMNIMAX lifter (version 002) in an OL W. This requires a tailgate modification. |
29/04/2022 | CE markets | 317986 |
| Assembling of an OMNIDEKA lifter with the FMS option via CAN in an OL Wide system has been updated. The lifter connection cable for this option is 600mm long and is not long enough to reach the usual connection position when installed on a foldable DIN door.To solve this, a new support has been created to connect the lifter wiring with the OL.This improvement is temporary, because the appropriate steps have been taken with Terberg so that they supply the lifters with the length of the wiring longer than the current one. | 12/05/2022 | CE markets | |
| A new installation for the SESALY Flashing triangle mounted on an OL Wide or Narrow with EUROTRADE lifter has been created.SESALY center panel bracket has been modified to allow mounting on OL Wide and Narrow tailgates. | 15/03/2022 | TMSAS | 317719, 317720, 317721 |
|
A new option has been created for the OL Wide with Eurotrade lifter to include the snow chain hooks on the tailgate. |
18/03/2022 | STECO | 317653 |
|
New supports have been created for the assembly of the cabin terminals in an OL with a SCANIA chassis according to NC0277. Customer requires mounting midway between both seats and in front of the instrument panel. |
14/03/2022 | TMSAS | 318009 - 318024 |
| Updated option for ALARM SOUND ALERT GONG GONG by adding a push button foot switch to activate the GONG GONG alarm with the foot. This button will be mounted at the driver's feet so that when he presses it, the alarm will activate and notify the operators at the rear of the equipment. The has been generated from NC0608. | 14/03/2022 | TMSAS | 318085 to 318087 |
| Stickers for HS market have been updated with the new company logo. The CE plate for that market has also been updated. | 31/03/2022 | THS | |
| A series of improvements have been made in the OL equipment with a special hopper for Portugal. The actions carried out are the following: - A new high rave rail edge has been created. - Manufacturing assembly has been updated according to the points agreed upon in the meeting with Resitul. - Created a new shield for the roof of the Portugal hopper. - Added new holes in the steel fairings for the lights and camera Peterson on the left column. |
29/03/2022 | Resitul | 318367, 318368, 318369, 318370, 318585 |
|
A new option has been created from NC0579 for the mounting of a configurable timer on the upper rear part of the OL tailgate. |
08/04/2022 | TMSAS | 318181, 318182, 318183 |
|
A new manufacturing set “OL Extra Low Rave Rail Extension” has been created for an OMNIDEL lifter to replace the current set. From now on the existing set becomes obsolete. The new set will incorporate the folding loading edge EXTRA LOW instead of the one that was mounted on the set FOLDING LOW EDGE. This change has been generated by the amount of OL equipment manufactured for TMSAS with OMNIDEL lifter. They require the mounting height of the OMNIDEL lift on an OL Wide to be between 800mm and 820mm from the ground, this results in having to mount the extra low rave rail. |
30/06/2022 | TMSAS | |
| CRASH BEAM OPENBACK GERMANY. In this, a new manufacturing set underrun for an OL Wide Openback tailgate with footsteps for Germany has been created. This new set should replace the current set. | 30/03/2022 | THS | |
| O L Y M P U S + O L Y M P U S T W I N P A C K | |||
|
A new option has been created from NC0326. The client requests the installation of a rear button panel on the tailgate to control the start and stop of the truck's engine. The sequence of operations of this option according to the client will be the following: |
30/04/2022 | THS | 317710, 317711 |
| OL, OL MINI CE, OLTP, Binwasher and water tank | |||
|
Reference for WIRING, CAB NOELIT, PWG5FMSV4 has been updated. The change has been generated to improve the contact of the main relay in the cabins of the OL. In the TMSAS market there have been some incidences of burnt relays in OL cabinets. The changes made in the new version are: |
16/01/2023 | CE markets | |
| Latest updates in options | |||
| Option text | Option code | Modification type | Market affected |
| O L Y M P U S | |||
| Vehicle weighing system activated. No compaction blockage. Availability to read from the weighing system of the vehicle via CAN. Without compaction blockage. Only valid for chassis MAN, Renault, Volvo, Mercedes and SCANIA. |
021020 | New option | CE markets |
| Sesaly warning light system (centre). Warning light panel, brand SESALY. Lighting panel in one piece. Mounted in the center. ONLY with Terberg OmniTrade, Terberg OmniMax and with an auxiliary lifter with DIN door/frame. | 152070 | Text modified (includimg OmniMax) |
CE markets |
| O L Y M P U S M I N I | |||
| Fire extinguisher. 6Kg fire exting. & supports. 6 Kg fire extinguisher (mounted). ONLY for FBM. |
2081030 | Option deleted | CE markets |
| Antiwear platform. Olympus MINI body with antiwear platform made of HARDOX 450AR (HIACE) instead of S355. | 2019020 | New option | CE markets |
| O L Y M P U S T W I N P A C K | |||
| OL TP 12WL (65/35) FBM |
5-00818-0033 |
New capacity |
CE Markets |
| OL TP 12WL (65/35) FBU |
5-00818-0034 |
New capacity |
CE Markets |
| Broom and shovel supports in the tailgate - right. Support for shovel and broom in the tailgate right side. Broom and shovel not included. Only compatible with specific brooms (see graphical reference). ONLY with UPC, Terberg OmniTrade, lifters with DIN door (no foldable) or OmniMax. |
074050 |
Text modified |
CE Markets |
| Broom and shovel supports in the tailgate - left. Support for shovel and broom in the tailgate left side. Broom and shovel not included. Only compatible with specific brooms (see graphical reference). ONLY with UPC, Terberg OmniTrade, lifters with DIN door (no foldable) or OmniMax. |
074060 |
Text modified |
CE Markets |
| Broom and shovel supports in the tailgate - both sides. Support for shovel and broom in the tailgate left side. Broom and shovel not included. Only compatible with specific brooms (see graphical reference). ONLY with UPC, Terberg OmniTrade, lifters with DIN door (no foldable) or OmniMax. |
074070 |
Text modified |
CE Markets |
|
Marker lights to show the lower outer limits of the body. Red LED lights with arms. 2 Lights. |
5-00388-0002 |
New option |
CE Markets |
| Latest updates in technical-commercial documentation | |||
| Description | Date | Market affected | Available at |
| U P C | |||
| Updating of the UPC books (New LOGO and corporate format). Languages ESP, FR, EN, POR. |
08/04/2022 |
CE markets |
SIGMA and included with every unit |
| B I N W A S H E R | |||
| Updating chassis specifications sheet (New LOGO and corporate format). Languages ES, ENG. |
22/04/2022 |
CE markets |
SIGMA |
| Updating of the Binwasher V3 books (New LOGO and corporate format). Languages ESP, FR, EN, POR |
04/03/2022 |
CE makets |
SIGMA and included with every unit |
| O L Y M P U S | |||
|
Updating technical datasheets (New LOGO and corporate format). Languages ESP, ENG, GR, FR. |
22/04/2022 |
CE markets |
SIGMA |
For further product information, please contact your local Sales Manager
